ETAS Technical Data
ES930.1 - User Guide 91
The manufacturers of network adapter have different names for this function.
Example:
• “Link down Power saving”
• "Allow the computer to turn off this device to save power".
13.8.2.3 ETAS Hardware (Rapid Prototyping)
ES910.2, ES910.3
13.8.3 Software
The following software in the following versions (and higher) is required for
configuring the ES930.1 as well as for control and data acquisition:
13.8.3.1 General
• ES93x Configuration Tool V1.3.0
• ES4xx/ES63x Configuration Tool V1.3.0 (optional)
• HSP V9.5.0
13.8.3.2 Measurement and Calibration (MC)
• INCA V7.0.0, Hotfix 4 with INCA Add-On ES93x V1.3.0
13.8.3.3 Rapid Prototyping (RP)
• INTECRIO V4.0
• ASCET-RP V6.1.3
NOTE
The Flow Control function is supported by the ES930.1 module from
HSP V9.7.0 (see chapter
3.7.6 on page 27).
To Next Page
Loading...