204 Element User Manual
Recall a Macro
You can recall a macro from the command line, run it from the execute field of a cue, or from
another macro.
To play macro 5 from the command line press [Macro] [5] [Enter]. “Running Macro 5” displays
above the command line in live while the macro is running, if the macro is a default or foreground
macro.
To run macro 5 from cue 1 press:
• [Cue] [1] {Execute} [Macro] [5] [Enter]
To run a macro from another macro, see the example under Create a New Macro in the Macro
Editor Display, page 202.
Stop a Macro
If you need to stop a macro while running (for example, during an infinite loop) you may press
[Escape] and the macro will stop.
Delete a Macro
You can delete a macro from the macro editor display by selecting the macro and pressing [Delete]
[Enter]. You will be prompted to confirm the deletion. Confirm by pressing [Enter] again, or abort by
pressing [Clear].
For Example:
Delete macro 5 from the macro list:
•[5] [Enter]
• [Delete] [Enter] [Enter]
Or from any display:
• [Delete] [Macro] [5] [Enter]
To Next Page
Loading...
