ETC Lighting Control Console - Selecting Channels

6 Patch 71
• Yellow “?” means that the dimmer/ device has a warning message.Warning messages can
include:
• Multiple devices’ addresses overlap
• Multiple devices of different devices at this address
• Patched fixture type mismatch
• Patched fixture address mismatch
• Offline
Detaching Devices
Pressing {Attach} twice will post the {Detach} command.
<Chan> [X] {Attach} {Attach} or <Address> [X] {Attach} {Attach} will remove the link between
that channel/address and the device at that address.