ETC Lighting Control Console - Page 56

44 Element User Manual
{Trackball Settings}
This screen allows you to make adjustments to a trackball.
{Trackball Tick Freq.}
This fader adjusts the trackball tick frequency. The default is 200 ticks.
{Trackball Acc. Fctr}
This fader adjusts the trackball acceleration factor. The default is 800 zip.
{Swap Pan/Tilt}
This touchbutton swaps the directions for Pan and Tilt on a trackball. The default for Pan and Tilt is
X and Y, respectively. When this button is enabled, Pan and Tilt will be Y and X.
{Reverse Pan}
This touchbutton reverses the direction of Pan.
{Reverse Tilt}
This touchbutton reverses the direction of Tilt.
{Reset}
This button resets all five trackball settings back to their default.