ETC Sensor3 CEM3 - Redundant System Configuration and Firmware Upgrades

56 CEM3 User Manual
Note:
Note:
See Quick Setup menu
flow chart.
Backlight Time will
only appear if
Backlight Mode is set
to Auto.
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Setup
[Dimmers]
[Rack]
[Circuit Assignment]
[Patching]
[Network]
[File Operations]
[Panic]
[Time/Date]
[Quick Setup]
[UI Preferences]
Panic Setup
In Delay (sec): [0]
Out Delay (sec): [0]
Fade In (sec): [2]
Fade Out (sec): [2]
Shed Other Loads: [Y]
[Record Panic Look]
A T T E N T I O N !
Are you sure you
want to overwrite
the Panic Look?
[No/Cancel]
[Yes/Save]
A T T E N T I O N !
Are you sure you
want to overwrite
the Panic Look?
[No/Cancel]
[Yes/Save]
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Setup
[Dimmers]
[Rack]
[Circuit Assignment]
[Patching]
[Network]
[File Operations]
[Panic]
[Time/Date]
[Quick Setup]
[UI Preferences]
Set Time/Date
Mode: [Manual]
Time Hour: [10]
Time Minutes: [08]
Year: [2017]
Month: [Jun]
Day: [20]
Set Time/Date
Mode: [Automatic]
Offset fro m UTC: [0]
Time Service: Found
Current Time:
20 Jun 2017 15:08
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Setup
[Dimmers]
[Rack]
[Circuit Assignment]
[Patching]
[Network]
[File Operations]
[Panic]
[Time/Date]
[Quick Setup]
[UI Preferences]
Rack #1 - CEM3 Rack
System OK
DMX A: Off DMX B: Off
sACN: 1/1
[Quick S etup] [Info]
Setup
[Dimmers]
[Rack]
[Circuit Assignment]
[Patching]
[Network]
[File Operations]
[Panic]
[Time/Date]
[Quick Setup]
[UI Preferences]
UI Preferences
Backlight Mode: [Auto]
Backlight Time: [05:00]
Contrast: [29]
Language: [English]
Temp Locale: [F]
sACN: [Uni/Ch]