30
Eversense E3 CGM User Guide
3
10. “Connected” appears next to the smart
transmitter ID once the pairing is complete.
The smart transmitter will provide intermittent
vibrations until the smart transmitter is linked
with the inserted sensor (see Inserting and
Linking the Sensor).
• Tap Next.
11. The UNIT OF MEASUREMENT screen
appears and indicates the standard unit of
measurement for your region. Your glucose
readings will always be displayed in this unit
of measurement.
• When the unit of measurement is confirmed,
tap Finish.
Caution: DO NOT change the unit of
measurement unless you have discussed it with
your healthcare provider.
3
To Next Page
Loading...
