Evident IPLEX TXII - When These Symptoms Occur; When Requesting Repair of this Product

If the above remedies do not solve the problem, restart the tablet.
5.1.2 When these symptoms occur
Abnormal content Cause and remedy
Lighting is dim. Tip is dirty.
-> Wipe with a clean gauze or a cotton swab. "Cleaning the tip " (page
45)
Image is not
sharp.
The objective lens at the tip is dirty.
-> Wipe with a clean gauze or a cotton swab.
"Cleaning the tip " (page
45)
Image is not
bright enough.
Observation settings are incorrect.
-> Use the d-pad [L] or [R] to adjust the amount of light. "Adjusting
brightness " (page 34)
The objective lens at the tip and the illumination section are dirty.
-> Wipe with a clean gauze or a cotton swab. "Cleaning the tip " (page
45)
Color adjustment
is not appropriate.
White balance is incorrect.
-> Correct the white balance.
Noise is
noticeable.
Observation settings are incorrect.
-> Use the d-pad [L] or [R] to adjust the amount of light.
"Adjusting
brightness " (page 34)
A bent part does
not return to its
original state.
The angle lock mechanism is in use.
-> Use the angle lock lever to release the locked position.
There is resistance
when bending the
device.
The angle lock mechanism is in use.
-> Use the angle lock lever to release the locked position.
Live images are
not displayed.
The scope unit and control unit are not connected properly.
-> Reconnect the scope unit and the control unit correctly and restart
this application.
5.2 When requesting repair of this product
When requesting repair of this product, contact the store where you purchased the product.
Also, let us know the details of the abnormality and the circumstances under which it
occurred.
44