Evident IPLEX TXII - Storing the Product in the Carrying Case

IPLEX TXII
6.2.2 Storing the product in the carrying case
NOTE:
l
Do not forcibly bend, pull, bundle, twist, or crush cables, and do not expose them to
anything hot enough to melt the coating. Doing so may damage the cable and cause fire
or electric shock.
l
Store this product normally in a room with normal temperature and humidity.
l
Store it in a clean, dry and stable place.
Storing the flexible scope unit
1.
Store the control unit in the carrying case.
Store the flexible scope unit with the logo facing the front.
NOTE:
Unlock the angle lock lever and store the product with the angle lever in a non-
operating state.
TIP:
The product can be stored in the carrying case with the shoulder belt attached.
2.
Run the inserting part of the flexible scope unit along the inside of the case [a]
so that the tip is kept in the case.
3.
Run the USB cable of the control unit along the inside of the case [b] to store it.
47