4.
Run the protection braid along the inside of the case [b] to store it.
5.
Store the lens cleaning kit in the case [c].
Store the rigid scope unit
1.
Store the control unit in the carrying case.
2.
Store the grip and tip of the rigid scope unit.
Run the cable of the rigid scope unit along the inside of the case [d] and roll it up twice.
Then store the grip and tip.
3.
Run the USB cable of the control unit along the inside of the case so that it can
be kept in the case.
4.
Store the protection sleeve and grip extender.
Remove the protection sleeve and grip extender from the rigid scope unit and store
them in the case [e].
5.
Store the lens cleaning kit.
Store the protection ring of the protection sleeve in the cleaning kit bag and store the
bag in the case [f].
48
To Next Page
Loading...