3.2 Connecting the control unit and tablet
1.
Connect the USB cable of the control unit to your tablet.
NOTE:
Connect the USB cable of the control unit without using a USB hub or similar. Connecting the
USB cable via a USB hub may cause unstable operation.
3.3 Installing the TXII software
3.3.1 Installing the TXII software
1.
Download the TXII software ZIP file from the download site below.
https://www.olympus-ims.com/service-and-support/downloads/
2.
Extract the ZIP file.
NOTE:
l
Please specify the internal storage of the tablet as the extract destination.
l
Do not delete, move, or rename the unzipped files or folders.
When the software is closed, a bin file that contains setting information will be
generated. Do not delete this file, either.
3.3.2 Activate the TXII software
1.
Connect a non-activated control unit to the tablet.
2.
Double-click the icon to start the TXII software.
A key code input dialog is displayed.
18
To Next Page
Loading...