NOTE:
Pay attention to the following when storing the product in the carrying case
l
Release the angle lock lever of the flexible scope unit before storing it.
l
Allow the tip to cool down before storing
l
Store the product after confirming that the inserting part is not twisted
Do not lift the carrying case when the lid is not closed
Attach and remove the scope unit and control unit when the TXII software is not
running
Do not change the file and folder attributes and access privilege settings after the
software has been installed
When using the TXII software, do not change file names, delete files or change folder
names by using other software
Exit the TXII software before changing file names or folder names.
To delete a file, use the TXII software (page 42), or exit the TXII software before deleting a file
When using the tablet without the AC adapter connected, make sure the battery is
fully charged
If the battery runs out and the tablet shuts down while recording a video, the video
will not be saved correctly
Follow local ordinances or regulations when disposing of this product
Safety Precautions - Precautions regarding lighting
This product uses high-intensity lighting to ensure sufficient brightness for observing a
subject for inspection. When the illumination of this product is on, a very strong light is
emitted from the distal end of the insertion section of the scope unit, so make sure to strictly
observe the following precautions.
CAUTION:
Do not turn on the light unless it is necessary
If the illumination light enters the eyes, the eyes may be injured. Even if the illumination light
is visible at the edge of the field of view, prolonged exposure may cause eye injury.
In situations where illumination light may enter the eyes, do not turn on the lights unless it is
necessary.
Don't stare at the light
The eyes may be injured. Even if looking at the illumination light from an angle or from the
side, there is a risk of injury to your eyes if you look at the light for an extended period.
6