Oil Cap Assembly, 15 – 90 HP Models
The oil cap used on 15 – 90 HP models has changed.
The oil cap has a redesigned vent valve, to help prevent oil from leaking out of
the vent while the engine is tilted.
Oil cap assembly, P/N 5008406, replaces oil cap assembly, P/N 5007256, and
services 2009 and newer 15 – 30 HP models and 2010 and newer 40 – 90 HP
(F-suffix) models.
Electric Starter Motor Change 40 – 65 HP Models
The electric starter motor used on Evinrude E-TEC 40 – 65 HP models has been
changed.
The starter features a new nut and spring to retain the drive gear. Previously, the
drive gear was retained with a clip, spring and spacers. This change improves
the durability of the starter and provides common service for all 15 – 65 HP mod-
els.
The electric starter motor, P/N 587045, services all 2004 and newer 15 – 65 HP
models.
To Next Page
Loading...
