44
ICON KITS
ICON Rigging Kits
ICON rigging kits are designed to make rigging kit selection an easy three or four
step process. Refer to the ICON Rigging Kit Selection Chart on p. 45, for rig-
ging kit selection.
Each ICON rigging kit includes all the boat related ICON components needed to
rig a single station or an optional second station, plus the appropriate ICON
remote control for the number of engines installed on the boat.
ICON Conversion Kits
ICON Conversion Kits add digital electronic shift and throttle control to 2008 and
newer Evinrude E-TEC 150 – 300 HP models. To add digital electronic shift and
throttle control to an Evinrude E-TEC outboard, order:
• ICON Conversion Kit, P/N 764979, for 200 – 300 HP 90° V6 models.
• ICON Conversion Kit, P/N 765304, for 150 – 200 HP 60° V6 models.
ICON conversion kits must be:
• installed by a dealer using Evinrude Diagnostics software.
• used on a boat equipped with an ICON remote control network.
• used with ICON, I-Command, or other NMEA 2000 compliant CANbus instru-
ments.
Update engine management software on 2008 – 2010 engines to ensure ICON
compatibility. Refer to the Installation Instructions provided with the kit.
Note: 2007 and older models are NOT compatible with the ICON remote control
system.
ICON Rigging Kit
ICON Conversion Kit
To Next Page
Loading...
