26
75 – 90 HP (1.3L) MODELS
Installation of Oil Pump Assembly
The problem: After installing a replacement oil pump assembly, the LOW OIL
warning light remains on even though the oil tank is full.
The cause: Incorrect installation can result in the low oil switch being held “ON”
by the oil pick up assembly.
The fix: Be sure to install the oil pump pick up assembly straight into oil tank.
Refer to the correct Service Manual for installation instructions. Make sure the
oil pick up assembly is positioned in front of oil tank baffle. This will prevent inter-
ference with the LOW OIL switch.
.
.
1. Oil pick up assembly
2. Oil tank baffle
To Next Page
Loading...
