58
P&A INFORMATION
Tiller Handle Kits Evinrude E-TEC 15 – 30 HP Models
Tiller Handle Kits for 15 – 30 HP models are available as follows:
Uses a 5-pin electrical connector. The neutral switch is attached. Refer to the
2009 or 2010 Accessory Parts Catalog for parts information.
Uses a 6-pin electrical connector. Refer to the 2011 Parts Catalog for order
information. Refer to the 2011 Accessory Parts Catalog for service parts infor-
mation.
Tiller handle kits for 2009/10 models are not interchangeable with 2011 model.
Frequently Requested Part Numbers
The following items are frequently requested part numbers and should be
ordered as needed:
• Predelivery Checklist, P/N 5008381, 10/pack
• Warranty Allowance Requests (warranty claim forms), P/N 773629, 25/pack
• RCM Form (form for return of unused, saleable parts), P/N 11111, 10/pack
• Model Year Reference Guide, P/N 5006145
• 2011 Predelivery and Installation Guide, P/N 5008506 *
• ICON Installation Guide, P/N 764952 *
• I-Command Users Guide, P/N 355917 (3.5 inch) *
• I-Command Users Guide, P/N 355918 (2 inch) *
• I-Command Product Selection Guide, P/N 764677 *
* Available for download from DealerPort or BossWeb.
Color
Model Year
Blue White Note
2009–2010 5007834 not available 5-pin electrical connector
2011 & newer 5008256 5008237 6-pin electrical connector
To Next Page
Loading...
