EVS XT2 - Ventilation & Rack Mounting; Compliance

XT Series DISK RECORDER – Version 9 - Hardware Technical ReferenceIssue 5.00
EVS Broadcast Equipment SA – April 2008
6
1.4.4 VENTILATION & RACK MOUNTING
Adequate ventilation is obviously required for optimum performance. As
result of this consideration, ensure no other equipment is located close to
the mainframe.
Important
• Remember that fans are used to air cool the equipment and
protect it from overheating.
• Do not block fans intakes during operations.
Having regard to the weight of the LSM-XT chassis, support guides are
required for this unit into the rack mount. The front ears of the LSM-XT
unit are not designed to support its full weight. Applying full weight on
these might result in bending the metal plate.
1.4.5 COMPLIANCE
The EVS Disk recorder systems are in compliance with the Class A norm
of the FCC rules and have been verified to comply with the
electromagnetic compatibility standards of the European Directive
89/336/EEC particularly standards EN50081-1 and EN50082-2.