EVS XT2 - Compatibility between MTPC, XT Server and Multicam Version

XT Series DISK RECORDER - Version 9.00 - Hardware Technical Reference Manual
EVS Broadcast Equipment SA – April 2008
Issue 5.00
59
3.5.3 COMPATIBILITY BETWEEN MTPC, XT SERVER AND
MULTICAM VERSION
MTPC revision
A1/R2 A2/A3 A2/A4
Multicam
before v. 8.04
Memory hole
enabled
Memory hole
enabled + patch
“Patch multicam
versions inf
08.04 for A2-A3
MTPC.zip”
Memory hole
enabled + patch
“Patch multicam
versions inf
08.04 for A2-A3
MTPC.zip”
Multicam
v. 8.04
Memory hole
enabled
Memory hole
enabled or
disabled
Memory hole
enabled or
disabled
Multicam
v. 9 & later
Memory hole
disabled and
ENVS jumper
set.
Memory hole
disabled.
Memory hole
disabled.
MEMORY HOLE ACTIVATION FOR XT SERVERS
When the version 9.00 or a later version is installed, the BIOS
parameters are automatically adapted to the hardware.