1 About this step switched machine
1/2
1.2 Controls
1.2.1 Control M100
M100 / M110
Standard control M100 “Two-knob operation“
with functions such as steplessly adjustable wire feed
speed and pulse- pause time and the operating modes:
2-step (latch welding), 4-step (continuous welding, spot
welding, and tacking. Gas after-flow and wire burn-back
time as well as arc off wire threading and gas test can
be set internally.
Display unit M110 (Option - can be retro-fitted) in
conjunction with the M100 or M201
Two large LED- displays show the welding voltage and
welding current during and after welding (Hold-
Function).
To Next Page
Loading...
