1 About this step switched machine
1/4
1.3 Range of Applications:
These machines are only for use for MIG / MAG standard welding with short- mixed- and
spray- arc using Argon, Mixed gases and CO
2
.
•
Materials: Low and high alloyed steels, Aluminium- and Nickel based alloys,
Copper and its alloys.
Solid wire and cored wire electrodes
Applications: Production and repair welding in metalworking industries and trade,
maintenance of agricultural equipment, switchgear and ventilation work,
steelwork and engineering, tacking in production jobs,vehicles and
installation work etc.
•
S
Symbol Units may be used in accordance with VDE 0544 (EN 60974-1) in
where increased electrical danger exists.
To Next Page
Loading...
