Safety Information
MaxTester Series 13
Electrical Safety Information
WARNING
Never connect the unit to the AC mains (with the
adapter/charger) when it is used outdoors.
Position the unit so that the air can circulate freely around it.
Operation of any electrical instrument around flammable gases
or fumes constitutes a major safety hazard.
To avoid electrical shock, do not operate the unit if any part of
the outer surface (covers, panels, etc.) is damaged.
Only authorized personnel should carry out adjustments,
maintenance or repair of opened units under voltage. A person
qualified in first aid must also be present. Do not replace any
components while the power cable and battery are connected.
There is no need to remove the battery before inserting or
removing a power meter or a VFL, but you need to follow the
instructions provided in the user documentation carefully.
Unless otherwise specified, all interfaces are intended for
connection to Safety Extra Low Voltage (SELV) circuits only.
Capacitors inside the unit may be charged even if the unit has
been disconnected from its electrical supply.
To Next Page
Loading...
