EasyManua.ls Logo

EXFO MaxTester series - Configuring Your Unit At First Startup

EXFO MaxTester series
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Information
14 MaxTester Series
Electrical Safety Information
WARNING
Use only the listed and certified AC adapter/charger provided by
EXFO with your unit. It provides reinforced insulation between
primary and secondary, and is suitably rated for the country
where the unit is sold.
Use only accessories (such as the car outlet adapter, batteries,
and fiber inspection probe) designed for your unit and
approved by EXFO. The car outlet adapter contains a
replaceable fuse. Replace the damaged fuse ONLY with a fuse of
the same type: 3AG certified, 16 VDC, 3 A, with an I
2
t between
40 A
2
sec and 80 A
2
sec. For a complete list of accessories
available for your unit, refer to its technical specifications.
When you use the unit outdoors, ensure that it is protected
from liquids, dust, direct sunlight, precipitation, and full wind
pressure.
Equipment Ratings
Temperature
Operation
a
unit powered by batteries: 1C to 5C (1F to
122 °F)
unit connected to AC adapter: 5 °C to 40 °C (41 °F to
104 °F)
Storage
b
unit without batteries: –30 °C to 70 °C (–22 °F to
158 °F)
unit with batteries: –20 °C to 60 °C (–4 °F to 140 °F)
Relative humidity
c
unit: 95 % non-condensing
AC adapter: 10 % to 80 % non-condensing

Table of Contents

Other manuals for EXFO MaxTester series

Related product manuals