Getting Started with Your Unit
34 MaxTester Series
Installing or Upgrading the Applications
11. When the application prompts you to restart the unit, tap OK.
12. When the configuration wizard is displayed, follow the on-screen
instructions (see Configuring Your Unit At First Startup on page 24).
Note: At this point, if you have used a USB memory key to update your unit, you
can remove it.
CAUTION
It is normal that your unit restarts a few times during the upgrade
process.
To avoid causing irreparable damage to your unit, do not turn off
your unit or force a power reset during the upgrade process. You
will know that the upgrade is over when the configuration wizard is
displayed.
To Next Page
Loading...
