Safety
Safety and Instructional Decals
• K ee p all safety signs legible . R emo v e all g rease ,
dir t and debris from safety signs and instr uctional
labels .
• R e place all w or n, damag ed, or missing safety
signs .
• W hen re placement components are installed, be
sure that cur rent safety signs are afx ed to the
re placed components .
• If an attac hment or accessor y has been installed,
mak e sure cur rent safety signs are visible .
• New safety signs ma y be obtained from
y our authorized Exmark equipment dealer or
distributor or from Exmark Mfg . Co . Inc .
• Safety signs ma y be afx ed b y peeling off the
bac king to expose the adhesi v e surface . Apply
only to a clean, dr y surface . Smooth to remo v e
any air bubbles .
• F amiliarize y ourself with the follo wing safety signs
and instr uction labels . T hey are critical to the safe
operation of y our Exmark commercial mo w er .
decal109-6036
109-6036
1. Read the Operator ’ s manual
2. Remove the ignition key and read the instructions before
servicing or performing maintenance.
3. Height of cut
decal112-9028
1 12-9028
1. W arning—stay away from moving parts; keep all guards
in place.
decal115-4212
1 15-4212
1. Hydraulic oil level 3. W arning—do not touch
the hot surface.
2. Read the Operator's
Manual .
decal116-5988
1 16-5988
1. Parking brake—engaged 2. Parking
brake—disengaged
6
To Next Page
Loading...
Need help?
General
