TLP Pro x25 Series and TLS x25 Series • Introduction 1
Introduction
This section discusses the following topics:
• About This Guide
• About the Touchpanels
• Features
• Application Diagrams
• Requirements
About This Guide
This guide describes the function, installation, and operation of the following Extron Touchlink Pro Touchpanels:
• TLP Pro 525M, TLP Pro 525M NC, TLP Pro 725M, TLP Pro 725M NC, TLP Pro 1025M, and
TLP Pro 1025M NC — wall mountable touchpanels. For use in a high-security environment, the camera,
Bluetooth, and microphone have been removed from the TLP Pro 525M NC, 725M NC, and 1025M NC
models.
A range of mounting options are available for each model (see Mounting on page 31).
• TLS 525M, TLS 725M, and TLS 1025M — versions of the TLP Pro 525M, TLP Pro 725M, and TLP Pro
1025M adapted for use with Room Agent scheduling software. Other than Mounting, this guide does not apply
to the TLS models. See the Room Agent User Guide or Room Agent Help File for more information.
• TLP Pro 525T, TLP Pro 525T NC, TLP Pro 725T, TLP Pro 725T NC, TLP Pro 1025T and
TLP Pro 1025T NC — touchpanels with weighted bases that allow them to stand on any suitable flat surface.
For use in a high-security environment, the camera, Bluetooth, and microphone have been removed from the
TLP Pro 525T NC, 725T NC, and 1025T NC models.
Unless otherwise stated:
• The term “touchpanel” refers to all models.
• “Wall mountable” models refers to the TLP Pro 525M, TLP Pro 525M NC, TLP Pro 725M, TLP Pro 725M NC,
TLP Pro 1025M, TLP Pro 1025M NC, and all three TLS models (TLS 525M, TLS 725M, and TLS 1025M).
• “Tabletop” models refers to the TLP Pro 525T, TLP Pro 525T NC, TLP Pro 725T, TLP Pro 725T NC,
TLP Pro 1025T, and TLP Pro 1025T NC.
• The term “TLP Pro 725T” refers to the TLP Pro 725T and the TLP Pro 725T NC.
To Next Page
Loading...