Extron electronics TouchLink TLP Pro 25 Series - Mounting to a Wall Box or Junction Box

TLP Pro x25 Series and TLS x25 Series • Mounting 32
Mounting to a Wall Box or Junction Box
Some local building codes require the touchpanel to be mounted in a junction box. Junction boxes or wall boxes
must be purchased separately.
NOTES:
• The TLP Pro 525M and TLS 525M touchpanels mount to a 1-gang junction box and have their own
mounting plate (see figure 27, top). The US 1-gang junction box should be installed so that the long side
is horizontal. EU or MK 1-gang junction boxes should be installed in the standard orientation.
• The TLP Pro 725M, TLS 725M, TLP Pro1025M, and TLS 1025M touchpanels mount to a 2-gang
junction box. All four of these models use the same mounting plate (see figure 27, bottom).
NORTH
AMERICA
N
NORTH
AMERI
CAN
MK
MK
EU/MK EU/MK
WALL
WALL
WALL
WALL
NORTH
AMERICAN
NORTH
AMERICAN
NORTH
AMERICAN
NORTH
AMERICAN
EU
EU
EU
EU
MK/WALL
MK/WALL
Figure 27. Mounting Plates for TLP Pro 525M (top) and TLP Pro 725M and 1025M (bottom)
gure 27