Extron electronics TouchLink TLP Pro 25 Series - Panel Features; Front Panel Features

TLP Pro x25 Series and TLS x25 Series • Panel Features 9
Panel Features
This section describes the TLP Pro x25 series and TLS series touchpanels:
• Front Panel Features
• Rear Panel Features
• TLP Pro 525T, TLP Pro 725T, and TLP Pro 1025T Base
• Connecting Power
Front Panel Features
Figure 3 shows the TLP Pro 725M (left) and TLP Pro 725T (right) front panels. The front panels for all models,
including TLS touchpanels have the same features and are very similar, apart from size.
B
B
BC
C
C
E
E
E
D
D
DB
B
B
A
A
A
e
B
B
BC
C
CD
D
DB
B
B
A
A
A
E
E
EE
E
E
A
LCD touchscreen
C
Communication LED
E
Front status light
B
Motion sensor
D
Light sensor
Figure 3. TLP Pro 725M (left) and TLP Pro 725T (right) Front Panels
A
LCD touchscreen — Made with tough, scratch-resistant touchscreen.
• TLP Pro 525 Series and TLS 525 — 5-inch touchscreen with 800x480 (WVGA) resolution
• TLP Pro 725 Series and TLS 725 — 7-inch touchscreen with 1024x600 (WSVGA) resolution
• TLP Pro 1025 Series and TLS 1025 — 10.1-inch touchscreen with 1280x800 (WXGA) resolution
B
Motion sensor (two) — The sensor detects motion between 3 to 5 feet (0.9 to 1.5 meters) from the TLP, and
at least 15° from the center axis.
When both Sleep Mode and Wake on Motion have been enabled (see Display on page 21):
• When no motion has been detected for a user-defined period of time, the touchpanel enters sleep mode.
• When motion is detected by the sensor, the screen display is restored and active.
gure 3