TLP Pro x25 Series and TLS x25 Series • Mounting 31
Mounting
There are several options for mounting these touchpanels. Visit the Extron website (www.extron.com) for a
complete list.
This section outlines the various options for:
• Mounting the TLP Pro x25M Series and TLS Series Touchpanels
• Mounting to a Wall Box or Junction Box
• Mounting to Drywall
• Mounting the Touchpanels with Optional Kits
• Mounting the TLP Pro 525T, 725T or 1025T
ATTENTION:
• All structural steps and electrical installation must be performed by qualified personnel in accordance
with local and national building codes and electrical codes.
• Toute étape structurelle et installation électrique, doit être effectuée par un personnel qualifié,
conformément aux codes du bâtiment, aux codes incendie et sécurité, et aux codes électriques, locaux
et nationaux.
• Do not install touchpanels in a fire resistant rated wall or partition assembly.
• Ne pas installer les écrans tactiles sur un mur protégé par un dispositif coupe-feu ou dans une cloison.
Mounting the TLP Pro x25M Series and TLS Series Touchpanels
NOTE: Mount the TLS 525M, TLS 725M, and TLS 1025M in exactly the same way as the corresponding
TLP Pro x25M touchpanel.
To Next Page
Loading...