Extron electronics XTP II CrossPoint Series User Manual

SIS Command and Response Table for Advanced Matrix Switcher Commands (continued)
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
View ties, gain, volume, mutes, presets, and power usage
Read RGB
(video) output tie
X@
&
X!]
Video input
X!
is tied to output
X@
.
Example:
5&
12
]
Input 12 RGB is tied to output 5.
Read video output tie
X@
%
X!]
Video input
X!
is tied to output
X@
.
Example:
7%
02
]
Input 2 video is tied to output 7.
Read audio output tie
X@
$
X!]
Audio input
X!
is tied to output
X@
.
Example:
3$
06
]
Input 6 audio is tied to output 3.
View output volume
X@
V
X3&]
Example:
7V
55
]
Volume setting for output 7 is 55 (86.5)%.
View input gain
X^
G
X*]
Example:
4G
-02
]
Audio input 3 level is -2 dB.
View output mutes
E
VM
} X3(
1
X3(
2
...
X3(
n
]
Each
X3(
is the mute status of an output:
left = output 1, right = output n.
n = 16, 32, or 64).
View video global preset
configuration
EX#
*
X@
*1VC
} X!
n
•
X!
n+1
•
X!
n+2
•
X!
n+3
•...•
X!
n+15
•Vid
]
Show the video configuration for
preset
X#
. Show the input tied to
16 sequential outputs, starting from
output
X@
.
Command description:
Response description:
preset number*starting output # (StO#)*1(=video)
VC
input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Vid
]
NOTES:
• The starting output number (
X@
) should always be “1” for the XTP II CrossPoint 1600.
•
EX#
*
X@
*1VC
}
where
X#
= 0 returns the current video configuration.
Example
(XTP II CrossPoint 1600, with
two output boards installed):
E
3*1*1VC
}
1Output:
Response = tied input:
input 12 tied to output 3
2345678
no tied input
input 8 tied to output 4
910111213141516
•00•00•00•00•00•00•00•00•
08•08•12•08•08•11•00•00•
•Vid
Each position shown in the response is an output: left = starting output (1),
right = starting output +15 (output 16). The number in each position is the input tied to that output.
In this example, preset 3, video input 8 is tied to outputs 1, 2, 4, and 5; input 12 is tied to output 3;
and input 11 is tied to output 6. No inputs are tied to outputs 7 and 8.
NOTE: X! = Input number 00 – 16, 32, or 64 (00 = untied)
X@ = Output number 01 – 16, 32, or 64
X# =
Global preset number
00 – 32 (00 = current configuration, applies to view ties command only)
X* = Numeric dB value –18 to +24 (45 steps of gain or attenuation) (0 dB = default)
X^ = Input number (for other than tie) 01 – 16, 32, or 64
X3& = Volume 00 – 64 (1 dB per step except for 0-to-1, which is 13 dB) (see table 10 on page 103)
X3( = Video and audio mute status 0 = No mutes 4 = Analog audio mute
1 = Video mute 5 = Video and analog audio mute
2 = Digital audio mute 6 = Digital and analog audio mute
3 = Video and digital audio mute 7 = Video, digital audio, and analog audio mute
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Programming Guide 112

Extron electronics XTP II CrossPoint Series Specifications

General

Brand	Extron electronics
Model	XTP II CrossPoint Series
Category	Matrix Switcher
Language	English