Extron electronics XTP II CrossPoint Series User Manual

Firmware Upgrade Page
NOTE: The Firmware Upgrade page is only for replacing the switcher firmware To
insert your own custom HTML pages, see File Management Page on page 134.
The Firmware Upgrade page is for replacing the switcher firmware without taking the switcher
out of service. Access the Firmware Upgrade page (see figure 64) by clicking the Firmware
Upgrade
link on the left of the System Settings, Passwords, or Email Settings page.
Figure 64. Firmware Upgrade Page
Update the switcher firmware as follows:
NOTE: This procedure was written using Windows Explorer. Depending on the browser
you use, some steps or indications may be different.
1. Visit www.extron.com, and click the Download tab (see figure 65,
1
).
11
33
22
44
55
66
Figure 65. Downloading a Firmware Package
XTP II CrossPoint 1600, 3200, and 6400 Switchers • HTML Operation
130

Extron electronics XTP II CrossPoint Series Specifications

General

Brand	Extron electronics
Model	XTP II CrossPoint Series
Category	Matrix Switcher
Language	English