Extron electronics XTP II CrossPoint Series User Manual

Date/Time Settings panel
The Date/Time Settings panel (see figure 61) provides a location for viewing and setting
the time functions.
Figure 61. Date/Time Settings Panel
Change the date and time settings as follows:
1. Click the drop-down list for the desired value. The adjustable variables are month, day,
year, hours, minutes, AM/PM, and (time) zone. A drop-down list appears (the year list is
selected in figure 61).
2. Click and drag the slider or click the scroll up button or the scroll down button until
the desired value is visible.
3. Click the desired value.
NOTES:
• If setting the time, set the local time. The Zone drop-down list allows you to
then enter the offset from Greenwich Mean Time (GMT).
• The Zone drop-down list identifies the standard time zone selected and
displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. If appropriate, select the appropriate Daylight Savings radio button to turn on the
daylight savings time feature for your region or nation.
NOTE: When Daylight Savings is turned on, the switcher automatically updates
its internal clock between Standard Time and Daylight Savings Time in the spring
and fall on the date that the time change occurs in the country or region selected.
When Daylight Savings is turned off, the switcher does not adjust its time
reference.
6. Click the Submit button.
XTP II CrossPoint 1600, 3200, and 6400 Switchers • HTML Operation
126

Extron electronics XTP II CrossPoint Series Specifications

General

Brand	Extron electronics
Model	XTP II CrossPoint Series
Category	Matrix Switcher
Language	English