EasyManuals Logo

Extron electronics XTP II CrossPoint Series User Manual

Extron electronics XTP II CrossPoint Series
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part15 of the FCC rules. The ClassA limits provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference. This interference must be corrected at
the expense of the user.
ATTENTION:
The Twisted Pair Extension technology works with shielded twisted pair (STP)
cables only. To ensure FCC Class A and CE compliance, STP cables and STP
connectors are also required.
La technologie extension paires torsadées fonctionne avec les câbles paires
torsadées blindées(UTP) ou non blindées(STP) uniquement. Afin de s’assurer de
la compatibilité entre FCC ClasseA et CE, les câbles STP et les connecteurs STP
sont nécessaires.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron Website.
Pour plus d'informations sur les directives de sécurité, les conformités de
régulation, la compatibilité EMI/EMF, l'accessibilité, et les sujets en lien, consultez
le «Informations de sécurité et de conformité Extron» sur le site internet
d'Extron.
Battery Notice
These units contain a battery. Do not open the unit to replace the battery. If the
battery needs replacing, return the entire unit to Extron (for the correct address, see the
Extron Warranty section on the last page of this guide).
CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose
of used batteries according to the instructions.
ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile.
Débarrassez-vous des piles usagées selon le mode d’emploi.

Table of Contents

Other manuals for Extron electronics XTP II CrossPoint Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Extron electronics XTP II CrossPoint Series and is the answer not in the manual?

Extron electronics XTP II CrossPoint Series Specifications

General IconGeneral
BrandExtron electronics
ModelXTP II CrossPoint Series
CategoryMatrix Switcher
LanguageEnglish

Related product manuals