6 Basic Introduction
6.1 Panel Overview
i32V i16V
Figure 1 - Panel
Table 3 - Panel introduction
Video signal acquisition and transmission
For speed dial, multicast, intercom, IP broadcast and
other functions
RFID card reader area,supports IC card and ID card
6.2 Quick Setting
Before proceeding with this step, make sure your Internet broadband connection is working
properly and complete the network hardware connection. The default factory mode of i32V is
DHCP and i16V is static IP address mode. IP address can be viewed by.
In standby mode, long presses the speed dial button for 10 seconds, there will be a beeping
sound and indicator light flashes for 5 seconds, press the speed dial button once within 5
To Next Page
Loading...
Need help?
General
