Fanvil i32V User Manual

21
Custom Option
Value
Custom option number. Must be from 128 to 254.
Enable DHCP
Option 120
Set the SIP server address through DHCP option 120.
SIP Plug and Play (PnP)
Enable SIP PnP
Whether enable PnP or not. If PnP is enable, phone will send a SIP
SUBSCRIBE message with broadcast method. Any server can
support the feature will respond and send a Notify with URL to phone.
Phone could get the configuration file with the URL.
Server Address
Broadcast address. As default, it is 224.0.0.0.
Server Port
PnP port
Transport Protocol
PnP protocol, TCP or UDP.
Update Interval
PnP message interval.
Static Provisioning Server
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name with subdirectory.
Configuration File
Name
The configuration file name. If it is empty, phone will request the
common file and device file which is named as its MAC address.
The file name could be a common name, $mac.cfg, $input.cfg. The
file format supports CFG/TXT/XML.
Protocol Type
Transferring protocol type ，supports FTP、TFTP、HTTP and HTTPS
Update Interval
Configuration file update interval time. As default it is 1, means phone
will check the update every 1 hour.
Update Mode
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
TR069
Enable TR069
Enable TR069 after selection
Enable TR069
Warning Tone
If TR069 is enabled, there will be a prompt tone when connecting.
ACS Server Type
There are 2 options Serve type, common and CTC.
ACS Server URL
ACS server address
ACS User
ACS server username (up to is 59 character)
ACS Password
ACS server password (up to is 59 character)
TR069 Auto Login
Enable/Disable TR069 Auto Login.
STUN
server address
Enter the STUN address

Fanvil i32V Specifications

General

Brand	Fanvil
Model	i32V
Category	Intercom System
Language	English