Enable Auto Answer function
Enable automatically hang up when no answer
Configuration automatically hangs up when no answer occurs within
the set time.
Set the time of no answer auto hangs up.
Configure to enable/disable fixed-length automatic dial-out numbers.
Configure the receiving number length; default is 4. After the user dials
the 4-digit number, the device will automatically call out the 4-digit
number.
Configure to enable/disable dial-up voice prompts, which are disabled
by default.
Language for configuring voice prompts.
If this item is selected, the device will reject any incoming calls and the
caller will remind the device not to use, but the local exhalation will not
be affected.
Configure IP broadcasting (press the # key for 3 seconds in standby
state); the default value is enabled.
Block Out Settings(Only for Door phone)
Add or delete blocked numbers – enter the prefix of numbers which should not be dialed by the
phone. For example, if 001 is entered, the phone would not dial any number beginning with
001.
X and x are wildcards which match single digit. For example, if 4xxx or 4XXX is entered, the
phone would not dial any 4 digits numbers beginning with 4. It would dial numbers beginning
with 4 which are longer or shorter than 4 digits.
Programmable Key Settings(Only for Door phone, “*”“#”key of customer setting)
Set the function of “*” and “#”key when idle.
Set the function of “*” and “#”key when Input password.
Set the function of “*” and “#”key when dialing.
Set the function of “*” and “#”key when alerting.
Set the function of “*” and “#”key when ringing.
Set the function of “*” and “#”key when call waiting.
Set the function of “*” and “#”key when talking.
To Next Page
Loading...
Need help?
General
