Figure 39 -
Advanced Settings
Table 25 -
Advanced Settings
Input port is
multiplexed as
function key 2
Enable or disable the input port to be multiplexed as speed dial button 2
Use Function Key to
Answer
Enable or disable shortcuts to answer calls
Enable or disable shortcuts to hang up calls
Number 1 call number 2 mode selection.
<Main/Secondary>: If the first number is not answered within the set
time, the second number will be automatically switched.
<Day/Night>:The system time is automatically detected during the call.
If it is daytime, the first number is called, otherwise the second number
is called.
Set number 1 to call number 2 time, default 16 seconds
The start time of the day when the <Day/Night> mode is defined.
Default "06:00"
The end time of the day when the <Day/Night> mode is defined. Default
"18:00