NAME PLATE
CARD G / FIT 8 V 6.15 E / April 2010
5. NAME PLATE
The name plate of the CARD G FIT is mounted on the back side of the unit and it contains
important operation data. The example below shows the name plate of a CARD 3G FIT.
The name plate contains the following information:
Unit type
Serial number
Year of manufacture
Operating voltage and frequency
Maximum electrical power consumption
Manufacturer and manufacturer’s address
It is very important to read the electrical power data on the name plate and
insure it matches the connected power supply before operating the
CARD G FIT.
The owner/operator is to contact before operating the unit in case
of unreadable data on the name plate to obtain this important data.
will also send a replacement name plate to the owner/operator.
THE OWNER/OPERATOR IS RESPONSIBLE FOR MAINTAINING A READABLE
NAME PLATE ON THE UNIT AT ALL TIMES.
To Next Page
Loading...