TRANSPORTATION AND STORAGE
CARD G / FIT 7 V 6.15 E / April 2010
4. TRANSPORTATION AND STORAGE
All CARD G FIT units are completely assembled, tested and packed
in a cardboard box by the manufacturer before they are delivered to the user.
The box is not suitable for transportation by fork lifts, pallet jaks and cranes.
To transport the unit using any of the above, the box must first be placed on a
suitable pallet and may then be moved.
DO NOT SHAKE OR DROP THE UNIT EVEN WHEN PACKED IN THE BOX.
The
CARD G FIT includes sensitive electronic components which might get
damaged.
The standard delivery terms of the CARD G FIT series are ex-works unless
otherwise agreed upon in writing. The box including the CARD G FIT and any
accessories delivered with the main equipment are to be inspected upon arrival
at the owner’s/operator’s destination and prior to signing the delivery
documents provided by the shipping company. Any signs of damage must be
documented on the shipping documents before signing. The equipment must be
inspected and any signs of damage must be reported to the shipping company
and the insurance company within 72 hours from the delivery time. Failing to do
so may void all claims for shipping damages.
It is also necessary to inform and its representative about any
transportation damage to destination or when moving the equipment on the
owner’s/operator’s properties.
The CARD G FIT contains electronic and electrical components and therefore it
must be protected from rain and snow even when stored in the shipping box.
The unit must be stored in a good enviroment and ambient air temperature
between -20°C [-4°F] and +50°C [122°F]. Dew and moisture condensation must
be avoided in the storage area.
The CARD G FIT and accessories must be in operation environments (+20°C
[68°F] to +50°C [122°F] and relative humidity up to 80% without condensation)
for a period of 3 hours before it can be set in operation.
To Next Page
Loading...