Felder RL 250 - Data Plate; Noise Emission

16
Baujahr / year of construction / ANNEE DE CONSTR.:
Absaugstutzendurchmesser xxx mm
Vnenn: (20 m/s) xxx m³/h
Unterdruck bei Vnenn: xxxx Pa
Gewicht: xxx kg, Vorsicherung xx A
Made in Austria
PH: HZ: A:
A-6060 HALL in Tirol, KR-Felder-Straße 1,
Austria, Tel. +43 (0) 5223 58500,
Fax +43 (0) 5223 56130, info@felder.at www.felder.at
Vmax: xxxx m³/h, Motordrehzahl 2800 U/min
ReinluftabsauggeraetKW:
V:
NR.:
TYPE :
XXX-XXX/XX-XX
XXXXXXXX
20xx
350 X.X400
X.X S1
8 x
1,6 m
#1
#2
#3
#4
#5
#7
#8
#6
prEN 16770
1 m
Dust Extractor
RL 250 / RL 300 / RL 350
Specifications
The specified values are emission values and therefore
do not represent safe workplace values.
Even though a relationship exists between particle emis-
sion and noise emission levels, an inference cannot be
made about whether additional safety measures need to
be implemented. Factors which can significantly affect
the emission level that presently exists at the workplace
include duration of the effect, characteristics of the work-
space, and other ambient influences.
The permissible workplace values may also differ from
country to country. Nevertheless, this information is provi-
ded to help the operator better assess hazards and risks.
Depending on the location of the machine and other
specific conditions, the actual noise emission values may
deviate significantly from the specified values.
Note: The measurement results are in accordence to prEN 16770
Measured by nominal volume flow in an open sound field., without transport of the chippings
(see sketches)
4.3 Data plate
Fig. 4-2: Data plate
4.4 Noise emission
The data plate displays the following specifications:
• Model designation
• Machine number
• Voltage
• Phases
• Frequency
• Power
• Power supply
• Year of construction
• Manufacturer information
Additional data:
• Vacuum
• Volume flow
• Backup fuse
Fig. 4-3: Noise emission values