19
!
Dust Extractor
RL 250 / RL 300 / RL 350
5.4 Packaging
Note: Help preserve the environment!
Packaging materials are valuable raw materials and in many cases they can be used again or
expediently reprocessed or recycled.
Note:
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking and storage symbols on the outside of the packa-
ging.
Attention! Dispose of the packaging materials in an environmentally friendly way and always in
accordance with local waste disposal regulations. If applicable, contract a recycling firm to dispose of the
packaging materials.
5.5 Storage
Store packed items only under the following conditions
• Do not store outdoors.
• Store in a dry and dust-free environment.
• Do not expose to aggressive substances.
• Protect from direct sunlight.
• Avoid subjecting the machine to shocks.
• Storage temperature : –10° to +50 °C
• Maximum humidity: 60 %
• Avoid extreem temperature fluctuations
(to prevent build-up of condensation).
• Apply a coat of oil to all machine parts open to
possible rusting (corrosion protection).
• When storing for a period longer than 3 months,
apply a coat of oil to all machine parts open to
rusting (corrosion protection). Regularly check the
general condition of all parts and the packaging. If
necessary, refresh or re-apply the coat of
anti-corrosive agent.
• If the machine is to be stored in a damp environment,
it must be sealed in airtight packaging and
protected.
(desiccant).
Making adjustments and preparations
If no agreement has been made with the supplier to take back the packaging materials, help to protect the environ-
ment by reusing the materials or separating them according to type and size for recycling.
• Scrap waste metal
• Recycle all plastic elements
• Sort all other components and dispose of appropriately.
To Next Page
Loading...
