18
!
!
Dust Extractor
RL 250 / RL 300 / RL 350
5 Transport, packaging and storage
5.1 Safety instructions
Warning! Risk of injury!
There is a risk of injury as a result of falling parts while transporting, loading or unloading the machine.
Attention! Risk of material damage!
The machine can be damaged or destroyed if it is subjected to
improper handling during transport.
For this reason the following safety instructions must be
observed:
• Never lift loads over a person.
• Always move the machine with the utmost care and
caution.
• Only use suitable lifting accessories and hoisting
devices that have a sufficient load-carrying capacity.
• Never lift the machine by its protruding parts.
• Consider the machine‘s centre of gravity when trans-
porting it (minimise the risk of it tipping over).
• Take measures to prevent the machine from slipping
sideways.
• Ropes, belts or other hoisting devices must be
equipped with safety hooks.
• Do not use torn or worn ropes.
• Do not use knotted ropes or belts.
• Ensure that ropes and belts do not lie against sharp
edges.
• Transport the machine as carefully as possible in
order to prevent damage.
• Avoid subjecting the machine to shocks.
• When transporting the machine overseas, ensure that
the packaging is airtight and that a desiccant is
added to protect the metal parts against corrosion.
5.2 Transport
Attention! Risk of material damage! The machine must be kept weatherproof while in transport.
5.3 Transport inspection
Upon arrival, inspect the shipment to ensure that it is
complete and has not suffered any damage. If any trans-
port damage is visible, do not accept the
delivery or only accept it with reservation. Record the
scope of the damage on the transport documents/
delivery note.
Initiate the complaint process. For all defects that are not
discovered upon delivery, be sure to report them as soon
as they are recognised as damage claims must be filed
within a certain period, as granted by law.
Making adjustments and preparations
To Next Page
Loading...
