8
Dust Extractor
RL 250 / RL 300 / RL 350
2 Safety
At the time of its development and production, the
machine was built in accordance with prevailing
technological regulations and therefore conforms to
industry safety standards.
However, hazards may arise should the machine be
operated by untrained personnel, used improperly or em-
ployed for purposes other than those it was designed for.
The chapter entitled “Safety” offers an overview of all
the important safety considerations necessary to optimise
safety and ensure the safe and trouble-free operation of
the machine.
To further minimise risks, the other chapters of this ma-
nual contain specific safety instructions, all marked with
symbols.
Besides the various instructions, there are a number of
pictograms, signs and labels affixed to the machine that
must also be heeded. These must be kept visible and
must not be removed.
2.2 Manual contents
All those appointed to work on or with the machine must
have fully read and understood the manual before
commencing any work.
This requirement must be met even if the appointed per-
son is familiar with the
operation of such a machine or a similar one, or has
been trained by the manufacturer.
Knowledge about the contents of this manual is a
prerequisite for protecting personnel from hazards and
avoiding mistakes so that the machine may be operated
in a safe and trouble free manner.
It is recommended that the operator requests proof from
the personnel that the contents of the manual have been
read and understood.
2.3 Making changes and modifications to the machine
In order to minimise risks and to ensure optimal perfor-
mance, it is strictly prohibited to alter, retrofit or modify
the machine in any way without the express consent of
the manufacturer.
All the pictograms, signs and labels affixed to the
machine must be kept visible, readable and may not be
removed.
Pictograms, signs and labels that have become damaged
or unreadable must be replaced promptly.
2.1 Work safety
Following the safety advice and instructions given in this
manual can prevent bodily injury and material
damage while working on and with the machine.
Failure to observe these instructions can lead to bodily
injury and damage to or destruction of the machine.
Disregard of the safety advice and instructions given in
this manual as well as the accident prevention regula-
tions and general safety regulations applicable to the
operative range of the machine shall release the manuf-
acturer and their authorised representatives from any
liability and from all compensation claims.
Safety
To Next Page
Loading...
