Fav 900
Engine / Lubrication
Removing and refitting oil cooler
G
Repair
Fav 900 chassis number 23/3001and up
14.02.2001
2312 000002
G
a
2/2
Capitel Docu-No.
Index
Date Version
Page
Removing and refitting oil cooler
PM-Picturemodule
PMTAB_Picture
Refit oil cooler
Fit oil cooler to the oil filter head with new gaskets.
Position oil filter head on engine block, using new
gasket. Place screws and tighten.
Warning:
Make sure gasket fits properly.
Refit oil filter:
Screrw in drain plug for coolant, using a new seal.
Connect sensor.
Check oil and coolant levels; top up if necessary.
To Next Page
Loading...
General