FENDT MAN D 0836 LE - Removing and Refitting Oil Pan

Fav 900
Engine / Lubrication
Removing and refitting oil pan
G
Repair
Fav 900 chassis number 23/3001 and up
14.02.2001
2312 000003
G
a
1/3
Capitel Docu-No.
Index
Date Version
Page
Removing and refitting oil pan
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Removing oil pan
Note:
Used oils are hazardous waste. Dispose
properly ! Respect safety regulations!
Pull out dipstick and remover filling cover..
Remove drain plug (Arrows) and drain oil.
Use a recipient with sufficient capacity.
PMTAB_Picture
Remove screws (arrowed)at the front of the oil
pan (water pump).
PMTAB_Picture
Remove two screws as shown.
PMTAB_Picture
Then remove the two (M8) screws which are fully
screwed ( not shown) into the flywheel housing.
Note:
When removing the oil pan it is essential to use
a jack : The oil pan is extremely heavy (approx.
100kg).