FENDT MAN D 0836 LE - Setting Valve Clearance

Fav 900
Engine / Cylinder head
Setting valve clearance
F
Setting and Calibration
Fav 900 chassis number 23/3001 and up
15.2.2001
2010 000003
F
a
1/2
Capitel Docu-No.
Index
Date Version
Page
Setting valve clearance
PM-Picturemodule
PM-Picturemodule
Text-module
Setting valves clearance:
Valves overlap on cylinder:
PM-Picturemodule
PMTAB_Picture
Engine must be cold for adjusting valve clearance.
(max. coolant temperature 50° C (122°F))
Setting valve clearance.
PMTAB_Picture
Rotate crankshaft using turning device until the
piston of the cylinder to be set is at top dead
centre ( TDC ) and the rocker arms are not loaded.
The valves of the synchronous cylinder are now
overlapping.
153624
624153
PMTAB_Picture
Layout of cylinder sequence and position of valves
I Fan end
II Flywheel end
A Exhaust valve
E Intake valve