FENDT MAN D 0836 LE - Valve Clearance Adjustment Procedure

Fav 900
Engine / Cylinder head
Setting valve clearance
F
Setting and Calibration
Fav 900 chassis number 23/3001 and up
15.2.2001
2010 000003
F
a
2/2
Capitel Docu-No.
Index
Date Version
Page
Setting valve clearance
PM-Picturemodule
PMTAB_Picture
● Insert gauge between valve shaft and rocker .
● With valve setting tool loosen lock nut and turn
setting screw until gauge can be moved with a
slight resistance.
● Tighten lock nut.
● Check clerance again.
● Refit cylinder head covers.
● Tighten screws and bolts to adequate torque.