Fav 900
Engine / Generalities
Service Data
A
General
Fav 900 chassis number 23/3001and up
13/03/2001
2000 000006
A
b
3/14
Capitel Docu-No.
Index
Date Version
Page
Service Data
Main bearing
PM-Picturemodule
PM-Picturemodule
Text-module
Flywheel
PM-Picturemodule
PMTAB_Picture
1. Standard size: 2,468-2,480 mm (.097 - .098")
Oversize 0,10 mm (.004"): 2,518-2,530 mm
(.099 - .100")
2. Fitted bearing inner Ø for main bearing :
Standard size : 77,040-77,086 mm
(3.033 - 3.035")
Undersize 0,10mm (.004"): 76,940-76,986 mm
(3.029 - 3.031")
Housing bore for main bearing: 82,000-82,022
mm (3.228 - 3.229")
Axial play: 0,040-0,105 mm (.002 - .004")
Spread of main spearing shells: 0,5-1,5 mm
(.020 - .059")
PMTAB_Picture
max permissible crankshaft axials play:
0,200-0,395 mm (.008 - .016")
1. Thrust bearing journal width thrust washer:
Standard size: 2,850-2,900 mm (.112 - .114")
Repair size: 3,100-3,150 mm (.122 - .124")
2. 27,967-28,000 mm (1.101 - 1.102")
PMTAB_Picture
1. Watch position of chamfer!
Fitting temperature (Shrink-on temperature):
220-240°C (428-464°F)
2. Flywheel: 352,390-352,447 mm
(13.874 - 13.876")
Ring gear (Internal): 351,671-351,760 mm
(13.845 - 13.849")
m total. = 50,3 kg (110.89 lbs.)
J total = 1,65 kgm²
3.Number of teeth : Z=125, Module 3
Mating gear (Z=11)
Backlash : 0,4-0,7 mm (.016 - .020")
To Next Page
Loading...