Fav 900
Engine / Generalities
Special tools
A
General
Fav 900 chassis number 23/3001and up
19/03/2001
9920 000004
A
a
4/7
Capitel Docu-No.
Index
Date Version
Page
Special tools
Text-module
Diagram
Nb.
Description Reference
19 Percussion type extractor to 18 80.99602-0016*
20 Slip-on grip for all pressing plates 80.99617-0129*
19 Pressing plate for front crankshaft seal 80.99617-0073*
20 Pressing plate for front crankshaft seal, flywheel end 80.99614-0032*
21 Dial for torque wrench and torque angle. 80.99607-0134*
22 Piston ring clamp 80.99613-0035*
23 Sliding bush Ø 108 mm 83.09144-0057*
24 Dial gauge bracket 80.99605-0172*
25 Piston ring pliers 83.09144-6090*
26 Scanner gauge 0,2 / 0,25 / 0,35 / 0,4 / 0,5, for valve setting 80.99607-0076*
27 Valve setting wrench 80.99603-6007*
28 Cylindre liner extractor, (Set). 80.99602-0019*
29 Extractor plate Ø 107,8 mm 80.99602-0123*
30 Intake air pressure gauge 0 to 2,5 bar, (Set). 80.99605-6010*
31 Ruler for Cylinder heads 80.99607-0044*
32 Test connector for compression recorder. X899.980.205**
33 Valve fitting lever 80.99606-0301*
34 Mandrel for inserting camshaft 80.99617-0060*
35 Mandrel for pressing camshaft bearing bushes in and out A5.00026-1136*
To Next Page
Loading...