Fav 900
Engine / Generalities
Service Data
A
General
Fav 900 chassis number 23/3001and up
13/03/2001
2000 000006
A
b
11/14
Capitel Docu-No.
Index
Date Version
Page
Service Data
Cooling system
PM-Picturemodule
PM-Picturemodule
Text-module
PMTAB_Picture
Water pump (engine)
1. Gap between impeller and housing:
0,5-0,9 mm (.020 - .035")
2. Impeller diameter: 136 mm (5.354")
3. Bearing location in housing:
54,940-54,970 mm (2.163 - 2.164").
Bearing diameter:
54,981-54,994 mm (2.1646 - 2.1651")
4. Bore in hub: 25,000-25,013 mm (.984 - .985").
Bearing shaft diameter: 25,048-25,061 mm
(.986 - .987").
5. Impeller bearing shaft bore: 16,000-16,018
mm (.630 - .631"). Bearing shaft diameter :
16,045-16,056 mm (.6316 - .6321).
PMTAB_Picture
Thermostat
Opening at 83°C (±2°) (181°F ±3.6°F).
Fully open: 95°C (203°F).
1. Stroke: min 8 mm at 95°C (.315" at 203°F).
To Next Page
Loading...