Fav 900
Engine /Cooling system
Replacing engine coolant
G
Repair
Fav 900 chassis number 23/3001 and up
08.02.2001
2050 000001
G
a
2/2
Capitel Docu-No.
Index
Date Version
Page
Replacing engine coolant
PM-Picturemodule
PMTAB_Picture
Filling Coolant
(only on a cooled down engine)
Fill in an adequate mixture of tap water and
antifreeze based on Ethylene - Glykol and
corrosion preventer.
Refer to Lubricants - Chapter l 0000 Reg. A
Use a proper ratio water / Antifreeze.
● Tighten screw on oil filter body using a new
gasket.
● Fill in slowly coolant mixture up to the adequate
coolant level
● Put in place screw cap
● After a short engine operation time , check
coolant level again
Caution:
If coolant level needs to be checked ,
the engine being at operating
temperature, first open cover vith
safety valve to release pressure - then
open carefully.
To Next Page
Loading...
General