The following product-specific terms and abbreviations
are used in this manual:
Term/
abbreviation
Meaning
Busy bit Release bit to analyze the data transfer with the CP system
CP cable Special cable for connecting the various CP modules
CP connection Socket or plug on the CP modules, with which the modules are
connected to the node by means of the CP cables
CP modules Common term for the various modules which can be incorporated
in a CP system
CP system Complete system consisting of CP fieldbus node and CP modules
I Digital input
I/O module Common term for the CP modules which provide digital inputs and
outputs (CP input and CP output modules)
I/Os Digital inputs and outputs
Node CP fieldbus node with/without fieldbus connection, to which the
I/O modules are connected
Octet Number of address words reserved by the CP system
O Digital output
PLC/IPC Programmable logic controller/industrial PC
Save
(SAVE buttons)
Save the current string assignment (connected I/Os);
when the CP system is started the saved string assignment is compared
with the current string assignment.
If these differ the LEDs will blink.
String Total number of I/O modules that are connected to one common
CP connection on the fieldbus node
String
assignment
Total of all I/O modules that are connected to a CP fieldbus node
via strings (0..3)
Contents and general safety instructions
X CP FB13-E 9904b
To Next Page
Loading...